Bisimoto Level 3.6 cam, D16Z6

[Bisimoto]

D16Z6
Bisimoto Level 3.6 cam
Bisimoto Valvesprings and Titanium retainers
Portflow head
Supertech valves
Arias 9:1 pistons
Bisimoto D16 spec rods
Bisimoto prototype top mount Manifold
Turbonetics GT-K 650
2.5" piping
3" downpipe + exhaust
91 octane
AEM EMS 1040
18 PSI
450whp at 293 wft/lbs of torque, with a very lopey idle

[Bisimoto]

D16Z6 head
Bisimoto Cam Gear
Bisimoto Pro Springs and Titanium retainers
Bisimoto Level 3.6 camshaft
Supertech Stainless Steel intake valves
Supertech Inconel Exhaust valves
Golden Eagle Head gasket
D16Z6 engine
Arias 9:1, 75.5mm pistons
Golden eagle sleeves
Bisimoto Spec H-beam steel Rods
Honda Bearings
Stock Ported Oil pump
Bisimoto/Evolution Sandwich plate
K&N Oil filter
Bisimoto heat shielding gasket
Golden Eagle Intake manifold
Skunk 2 68mm throttle body
T1 1000cc Injector dynamics squirters
AEM Fuel rail
AEM Fuel pressure regulator
AEM fuel pressure gauge
-6AN fuel lines
Stock return lines
AEM Water Meth kit (for super high boost!)
Kinsler Monster Mesh fuel filter
AEM 6040 Gen 2 EMS
AEM UEGO
AEM Twin fire
AEM COP EPM
AEM pencil Coils
AEM Serial Gauge (this is so sick!)
AEM boost control solenoid
AEM 5 bar map sensor
MSD digital Boost-a-pump pn 2351
Power XS S680 Battery
Rywire mil-spec wiring
Bisimoto-Turbonetics BTX6565
Bisimoto Prototype top mount twin scroll manifold, ceramic coated
Turbonetics RG-45 wastegate
Turbonetics Godzilla BOV
3" Intercooler piping
Turbonetics/Spearco 5-364 (3.5"x10.5"x28" wide..and yes, we made it fit!)
-3an oil feed line
-10an oil return
Burns Stainless 3.5" 2-stage muffler
3.5" aluminum exhaust system

708whp and 487 ft/lbs on 91 octane + 50/50% water methanol
724 and 500 ft/lbs on Torco 100 octane + 50/50% water methanol