D16 TURBO CAM

[yuyoturbo]

hello is yuyo from Puerto RICO '"SORRY MI ENGLISH NOt IS THE BEAST BUT" i have a D16y7 whit stock bore arias flat top eagle rod port and polish whit multiangle job head blox intake manifold, equal lengh manifold .my turbine is a garret 60 a/r ,60 trim compresor, the exhaust .63 whit stage2 fuel manegment a micro tech whit 1000cc ingectors.my car is to street use and drag use every wik. i have 3 questions for you? I will have 355 to 400whp what do you thinks.

what is not a god cam,the best cam i should to use for my cars '"sure'" YOUR grinds?. whats rev power band this cam produce?

whats trottle i should to use 65mm, 68mm ????.

thanks for your website is to god, Iam a student from mechanical ingeniering and I recognise your knolege,better than others palitroke honda tuners

[Bisimoto]

Thanks for the kind words. You goal can be realized! The level 1.2 is designed to peak at 7200 rpms for the Y7, and the level 2.4 is designed to peak at 8100 rpms. Of course, this would depend on the breathing characteristics of your setup. We look forward to taking care of you!

65mm will work well, but I would prefer a 67mm.

[yuyoturbo]

YUYO from PR what do you think about .im trying to get some infomation about change the road lenght on my d16 y7 project im think use stock stroke with custom rod lenght large as posible with custom proper piston and sleve the block with Bseries stock bore im trying to rev more easy and obtain more HP THAN TORQUE the problem is to get the rod lengh and the flat top piston whit this specification and the other problem is the overlap with the cam. im trying to put this combination in my engine.if you can help mi .
my question is .1 what` the greatest extent in rod i can use in turbo aplication.
2 the problem with overlap and rod ratio.
3 i have blox intake manifold for turbo aplicaation what intake is the best for HP
4 What is the largest bore i can use in my D BLOCK
5 What do you think about rod ratio VS Large strock for turbo aplications
thanks for your forum and i waiting for your answer and K SERIES CHANGE GEOMETRY answer